Describe it.
Build it.

Tell 10 Benches the device you want — in plain words — and get a complete, buildable hardware project back: working Arduino code, a parts list, a wiring diagram, a parametric enclosure CAD file, a step-by-step guide — and a simulator so you can watch it behave before you build it.

Free tier: 25 credits every month, resetting on the 1st. No card, no per-token charges, ever.

You say
"A light that turns on when someone walks into the room"
↓
10 Benches builds

Hallway Motion Light

Motion-Activated Light block · Arduino Uno · no extra libraries

const int PIR_PIN = 2;
const int OUT_PIN = 8;
const unsigned long HOLD_MS = 30000UL;

void loop() {
  if (digitalRead(PIR_PIN) == HIGH) {
    lastMotion = millis();
    if (!lightOn) {
      digitalWrite(OUT_PIN, HIGH);
      lightOn = true;
    }
  }
  // …full sketch in the builder
}
Sketch (.ino) Parts list Wiring diagram Enclosure CAD (.scad) Simulator Build guide

Built from one sentence

This is a real 10 Benches output — the exact project the prompt above generates, not a mockup. Parts, wiring, and code, ready to build.

Hallway Motion Light — what you need

PartQty
Arduino Uno R3 (or compatible)1
PIR motion sensor module (HC-SR501)1
LED, 5mm (any color)1
Resistor, 220 ohm1
Solderless breadboard, 400-point1
Jumper wires (male-to-male, assorted)1 pack
USB cable (A to B)1

How it wires up

FromTo
PIR sensor OUTArduino D2
PIR sensor VCC / GNDArduino 5V / GND
Arduino D8220 ohm resistor, then LED long leg (+)
LED short leg (-)Arduino GND

Build this project — 5 credits

The sketch you download

/*
 * Hallway Motion Light
 * Generated by 10 Benches (10benches.com)
 * Board: Arduino Uno R3
 */

const int PIR_PIN = 2;
const int OUT_PIN = 8;
const unsigned long HOLD_MS = 30000UL; // 30 seconds

unsigned long lastMotion = 0;
bool lightOn = false;

void setup() {
  Serial.begin(9600);
  pinMode(PIR_PIN, INPUT);
  pinMode(OUT_PIN, OUTPUT);
  digitalWrite(OUT_PIN, LOW);
}

void loop() {
  if (digitalRead(PIR_PIN) == HIGH) {
    lastMotion = millis();
    if (!lightOn) {
      digitalWrite(OUT_PIN, HIGH);
      lightOn = true;
      Serial.println("Motion - light ON");
    }
  }
  if (lightOn && (millis() - lastMotion > HOLD_MS)) {
    digitalWrite(OUT_PIN, LOW);
    lightOn = false;
    Serial.println("Quiet - light OFF");
  }
}

One promise, one simple model

A monthly pool of credits that resets on the 1st — an allowance, not a bucket that runs dry. A generation is 5 credits; each export is 1. No per-token charges, no surprise meters.

Free
$0
25 credits / month

Enough to build a project a week and take the files home. Resets monthly, forever free.

Start free
Starter
$16 / month
150 credits / month

For a hobby bench that never sits idle — a new build every weekend, exports included.

Start free
Pro
$80 / month
1,000 credits / month

For prototyping shops that build daily and export everything, every time.

Start free

Paid plans launch soon — the Free tier is live now, and checkout will never ask for card details anywhere but a real payment page.

Make it real

Soon: one click from a built project to the physical thing — the full parts kit in a box, or your design as a fabricated board, shipped to your door.

Coming soon